All bolted double angle connection in a coped beam
The analysis of an all-bolted double-angle connection between an ASTM A992 W18×50 beam and W21×62 girder web with specified coped beam dimensions and ASTM A572 Grade 50 angles shows that RAM Connection results closely match the AISC 2023 reference values for shear transfer strength at bolt holes, flexural local buckling, beam web yielding, and block shear rupture, all differing by less than 1%.
References
American Institute of Steel Construction. 2023. Companion to the AISC Steel Construction Manual Volume 1: Design Examples Version 16.0. Example II.A-4, p. IIA-67.
Details
From the reference:
Use AISC Manual Table 10-1 to verify the available strength of an all-bolted double-angle connection between an ASTM A992/A992M W18×50 beam and an ASTM A992/A992M W21×62 girder web, as shown in Figure II.A-4-1, to support the following beam end reactions: RD = 10 kips, RL = 30 kips. The beam top flange cope is 2 in deep by 4 in long, lev = 1 ¼ in, leh = 1 5/8 in. Use ASTM A572/A572M Grade 50 angles. Bolts are ¾” Group 120, thread condition N, standard holes. Angles are 2L5x3-1/2x1/4 SLBB. Refer to the figure in the reference for additional details.
Results
-
Shear transfer strength at the bolt holes at beam web (kip):
- RAM Connection: 73.35
- Reference: 73.5
- Difference: < 1%
-
Available shear transfer strength at the bolt holes at girder web (kip):
- RAM Connection: 96.28
- Reference: 96.4
- Difference: < 1%
-
Flexural local buckling of coped web (kip):
- RAM Connection: 373.39
- Reference: 374
- Difference: < 1%
-
Shear strength of beam web - yielding (kip):
- RAM Connection: 170.4
- Reference: 170
- Difference: < 1%
-
Block shear rupture of beam web (kip):
- RAM Connection: 68.79
- Reference: 68.6
- Difference: < 1%