D1.A.10.6 Updates to AISC 360-16
The document details updates from AISC 360-10 to AISC 360-16, including revised width-to-thickness slenderness limits for tees and box section flanges, updated compression buckling calculations for double and single angles, revised nominal compressive strength criteria for slender elements, and enhanced flexural design provisions such as lateral torsional buckling equations for non-standard I-shapes and refined tension flange yielding checks incorporating new web plastification factors.
This section highlights the changes implemented from AISC 360-16 compared to AISC 360-10.
Section Classification
The width to thickness ratio limits for members in flexure have been updated for the following element types as per AISC 360-16:
- Stems of tees (14) are considered slender when d/t > 1.52EFy
- Flanges of box sections (21) are considered slender when b/t > 1.49EFy
CHAPTER E: Compression Checks — Torsional & Flexural-Torsional Buckling Calculations
Design for the following profile shapes/conditions has been updated to use the corresponding clauses/equations from AISC 360-16:
2.a Cl. E4: Non-Slender Double Angles & Tee Shapes
- Calculation of Fez and Fey to use (E4-9) and (E4-8).
- Calculation of Fe to use (E4-3).
- Calculation of Fcr to use (E3-2) or (E3-3).
- Calculation of Pn to use (E4-1).
2.b Cl. E5: Single-Angle Compression Members
- Flexural torsional buckling limit for single angles changed to b/t ≤ 0.71EFy.
2.c Cl. E7: Compression Members with Slender Elements
- Calculation of nominal compressive strength and critical stress Fcr updated to follow the updated criteria from Clause E7.
CHAPTER F: Flexure Checks
Design for flexural members has been updated to use the following:
3.a Cl.F4: Non-Standard (Other) I-Shaped Members
Lateral Torsional Buckling:
The calculation of effective radius of gyration, rt, updated to use the AISC 360-16 equation F4-11 for I-shapes with a rectangular compression flange:
rt = bfc12(1 + 16aw) (F4-11)
3.b Cl.4: Tension Flange Yielding
The tension flange yielding checks have been updated to use the updated web plastification factor calculations as per equations F4-16a to F4-17.
- 1.
When Iyc/Iy > 0.23
-
When hctw ≤ λpw:
Rpt = Mp/Myt (F4-16a)
-
When hctw > λpw:
Rpt = [Mp/Myt − (Mp/Myt − 1)(λ−λpw)/(λrw−λpw)] ≤ Mp/Myt (F4-16b)
-
- 2.
When Iyc/Iy ≤ 0.23:
Rpt = 1.0 (F4-17)
3.c Cl.F7: Flexural Checks for Square and Rectangular HSS & Box Sections
-
Cl.F7.2: Flange local buckling checks updated to use F7-4 & F7-5 of AISC 360-16 to calculate the effective width of slender elements.
-
For HSS:
be = 1.92tfEFy(1 − 0.38b/tfEFy) ≤ b (F7-4) -
For box sections:
be = 1.92tfEFy(1 − 0.34b/tfEFy) ≤ b (F7-5)
-
-
Cl.F7.3: Web local buckling checks updated to use F7-6 through to F7-9 of AISC 360-16.
-
For sections with noncompact webs:
Mn = Mp − (Mp − FyS)(0.305htwFyE − 0.738) ≤ Mp (F7-6)where:
h = depth of web, as defined in Section B4.1b, in. (mm) -
For sections with slender webs:
-
Compression flange yielding:
Mn = RpgFyS (F7-7) -
Compression flange local buckling:
Mn = RpgFcrSxc (F7-8)and
Fcr = 0.9E kc(b/tf)^2 (F7-9)where:
Rpg = defined by Equation F5-6 with aw = 2h/tw/(b/tf) kc = 4.0
-
-
-
Cl.F7.4: Lateral torsional buckling checks updated to use F7-6 through to F7-13 of AISC 360-16.
3.d Cl.F9: Flexural Checks for Tees and Double Angles
-
Yielding checks for Tee sections updated to use Eqn F9-4 of AISC 360-16.
-
Yielding checks for Double Angle sections updated to use Eqn F9-5 of AISC 360-16:
Mp = 1.5My (F9-5) -
Lateral torsional buckling checks updated to use Eqns F9-6 through to F9-13 of AISC 360-16.
-
Flange local buckling calculations of Tees and double angle legs updated to include criteria as per Cl. F9.3 (b) of AISC 360-16.
-
Web local buckling checks for stem of Tee sections updated to use Cl F9.4 - Eqns F9-17 through to F9-19 of AISC 360-16.
-
Web local buckling checks for legs of double angle sections updated to use Cl F9.4 (b) of AISC 360-16.
3.e Cl.F10: Flexural Checks for Single Angles
- Lateral torsional buckling checks updated to use Eqns F10-4 through to F10-5b of AISC 360-16.
CHAPTER G: Shear Checks
4.a Cl.G2: I Shapes and Channels
- Calculation of shear strength coefficient Cv updated to use Eqns G2-2 to G2-4 of AISC 360-16.
- Calculation of shear buckling coefficient kv updated to use Eqns from section G2 of AISC 360-16.
- Criteria for consideration of tension field action updated as per Section G2.2 of AISC 360-16.
- Shear strength calculations for cases with tension field action updated to use Eqns G2-6 through to G2-11 of AISC 360-16.