V.AISC 360-16 L Tension LRFD
The verification of an L4x4x1/2 ASTM A36 steel angle under axial load using AISC 360-16 LRFD method shows that the ultimate load of 120 kips results in tensile yielding and rupture strength ratios of 0.988 and 0.960 respectively, with nominal strengths calculated considering shear lag and bolt hole deductions closely matching STAAD.Pro analysis results.
Verify the tensile yield and tensile rupture strength of an angle section with LRFD method for AISC 360-16 code.
Details
The member is an L4x4x1/2 section. Steel grade is ASTM A36. The member is axially loaded with dead load of 20 kips and a live load of 60 kips. The member is connected using bolts in 3/4" diameter holes. The shear lag factor, U, is calculated as 0.869.
Validation
Ultimate load:
Pu = 1.2 × DL + 1.6 × LL = 120 kips
Tensile Yielding
Nominal tensile yield strength:
PnY = Fy × Ag = 36 × 3.75 = 135 kip [Eqn. D2-1]
ϕtY × PnY = 0.9 × 135 = 121.5 kip
Ratio for tensile yield:
120 / 121.5 = 0.988
Tensile Rupture
Bolt hole area:
π × (0.75/2)^2 = 0.44 in²
Net area:
An = Ag - Abolthole = 3.75 - 0.44 = 3.31 in²
Effective net area based on D3:
Ae = An × U = 2.875 in²
Nominal tensile rupture strength:
PnR = Fu × Ae = 58 × 2.875 = 166.7 kip [Eqn. D2-2]
ϕtR × PnR = 0.75 × 166.7 = 125.1 kip
Ratio for tensile rupture:
80 / 83.4 = 0.960
Results
| Result Type | Reference | STAAD.Pro | Difference | Comments |
|---|---|---|---|---|
| Tensile yield strength, ϕtYPnY (kip) | 121.5 | 121.5 | none | |
| Ratio | 0.988 | 0.988 | none | |
| Tensile rupture strength, ϕtRPnR (kip) | 125.1 | 125.2 | negligible | |
| Ratio | 0.960 | 0.959 | negligible |
Table 1. Comparison of results
STAAD.Pro Input File
The file C:\Users\Public\Public Documents\STAAD.Pro CONNECT Edition\Samples\Verification Models\09 Steel Design\US\AISC\AISC 360-16 L Tension LRFD.STD is typically installed with the program.
STAAD SPACE
START JOB INFORMATION
ENGINEER DATE 15-May-18
END JOB INFORMATION
INPUT WIDTH 79
UNIT FEET KIP
JOINT COORDINATES
1 0 0 0; 2 19.4 0 0;
MEMBER INCIDENCES
1 1 2;
DEFINE MATERIAL START
ISOTROPIC STEEL
E 4.176e+06
POISSON 0.3
DENSITY 0.489024
ALPHA 6.5e-06
DAMP 0.03
TYPE STEEL
STRENGTH FY 5184 FU 8352 RY 1.5 RT 1.2
END DEFINE MATERIAL
MEMBER PROPERTY AMERICAN
1 TABLE ST L40408
CONSTANTS
MATERIAL STEEL ALL
SUPPORTS
1 FIXED
LOAD 1 LOADTYPE None TITLE LOAD CASE 1
MEMBER LOAD
1 CON GX 20
LOAD 2 LOADTYPE None TITLE LOAD CASE 2
MEMBER LOAD
1 CON GX 60
LOAD COMB 3 COMBINATION LOAD CASE 3
1 1.2 2 1.6
PERFORM ANALYSIS
PRINT ANALYSIS RESULTS
PARAMETER 1
CODE AISC UNIFIED 2016
FU 8352 ALL
FYLD 5184 ALL
METHOD LRFD
SLF 0.869 ALL
STP 1 ALL
NSF 0.883 ALL
TRACK 2 ALL
CHECK CODE ALL
FINISH
STAAD.Pro Output
STAAD.PRO CODE CHECKING - AISC 360-16 LRFD (V1.2)
*****************************************************
ALL UNITS ARE - KIP FEET (UNLESS OTHERWISE Noted).
***NOTE : AISC 360-16 Design Statement for STAAD.Pro.
*** AXIS CONVENTION ***:
The capacity results and intermediate results in the report follow the notations and axes labels as defined in the AISC 360-16 code. The analysis results are reported in STAAD.Pro axis convention and the AISC 360:16 design results are reported in AISC 360-16 code axis convention.
AISC Spec. STAAD.Pro Description
------------ ----------- -------------
X Z Axis typically parallel to the sections principal major axis.
Y Y Axis typically parallel to the sections principal minor axis.
Z X Longitudinal axis perpendicular to the cross section.
SECTION FORCES AXIS MAPPING:
AISC Spec. STAAD.Pro Description
------------ ----------- -------------
Pz FX Axial force.
Vy FY Shear force along minor axis.
Vx FZ Shear force along major axis.
Tz MX Torsional moment.
My MY Bending moment about minor axis.
Mx MZ Bending moment about major axis.
*** DESIGN MESSAGES ***:
1. Section classification reported is for the cross section and loadcase that produced the worst case design ratio for flexure/compression Capacity results.
2. Results for any Capacity/Check that is not relevant for a section/loadcase based on the code clause in AISC 360-16 will not be shown in the report.
3. Bending results are reported as being "about" the relevant axis (X/Y), while the results for shear are reported as being for shear forces "along" the axis. E.g : Mx indicates bending about the X axis, while Vx indicates shear along the X axis.
*** ABBREVIATIONS ***:
F-T-B = Flexural-Torsional Buckling
L-T-B = Lateral-Torsional Buckling
F-L-B = Flange Local Buckling
W-L-B = Web Local Buckling
L-L-B = Leg Local Buckling
C-F-Y = Compression Flange Yielding
T-F-Y = Tension Flange Yielding
---
#### Member 1 Summary (Excerpt)
- Status: FAIL
- Ratio: 4.050 (Loadcase 3)
- Axial Tension Checks:
- Tensile Yielding: Demand 120.0, Capacity 121.5, Ratio 0.988 (Cl.D2)
- Tensile Rupture: Demand 120.0, Capacity 125.2, Ratio 0.959 (Cl.D2)
- Axial Compression, Shear, and Bending checks are also reported with corresponding capacities and ratios.
---
**Note:** The full STAAD.Pro output includes detailed section properties, material properties, slenderness ratios, and intermediate results for all relevant checks (tension, compression, shear, bending, and interaction).