Bentley Systems

Viewshed Analysis tool settings

The Viewshed Analysis tool settings allow users to define the processing area (via block, element, shape, or view), specify the viewer's position or path with adjustable increments and elevation options, set output pixel size, name the resulting grid file, and initiate the analysis using specific key-in commands for each function.

Viewshed Analysis Tool Settings

Area

Defines the area to be processed. An STM is very large and in many cases areas away from the selected viewpoint do not need to be processed. Use the selection tool to identify the appropriate area or select the element or view. Select from:

  • Block
  • Oriented Block
  • Element
  • Shape
  • View

Key-in commands:

STM VIEWSHEDANALYSISDLG DEFINEAREA
BLOCK
ORIBLOCK
ELEMENT
SHAPE
FENCE
VIEW

View Position

Describes the viewer's position.

Key-in command:

STM VIEWSHEDANALYSISDLG IDENTIFYVEWERPOS

Method

Either a static point or a path.

Key-in command:

STM VIEWSHEDANALYSISDLG IDENTIFYVEWERPATH

Position

Active if Static position is selected. Enter the X, Y, and Z values or use the selection tool to define.

Increment

Specifies the increment distance along the path in which to calculate results. A smaller increment will increase processing time.

Elevation

Specifies the elevation to use:

  • The specified point or element: Uses the elevation as defined by the point or selected path element.
  • STM elevation: The height of the STM at that point.
  • Height above STM: The specified height above the STM.
  • User defined elevation: A user defined elevation. Only the X and Y values of the point or path are used for location with the elevation value determined by this parameter.

Pixel Size

The size of the output pixel in the resulting grid file. Smaller values increase processing time.

Measuring Tool

Use to measure the pixel size.

Key-in command:

STM MEASURER

Grid File Name

The name of the resulting grid file.

Run

Starts the viewshed analysis process.

Key-in command:

STM VIEWSHEDANALYSISDLG RUN